Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: recommendations for small-3 way solenoids

  1. #11
    Quote Originally Posted by y0da900 View Post
    If you can find one, one of the Lucky Ultimate Mac 33's is rated for 200psi and can run normally open or normally closed. Nothing unique to Lucky, it was a factory option from Mac, I'm just not aware of what other channel they have been available through and apparently require a very large order to get direct from mac.
    will those noids only work with barbs and hoses or can you create a manifold for it?

  2. #12
    They are intended for use with fittings and tubing, a manifold would be complicated for one.

  3. #13
    wasn't the mac 43 solenoids modified for the AKA so they could be mounted to a manifold?

  4. #14
    Insider
    Join Date
    Apr 2012
    Location
    Knoxville, TN
    Posts
    2,303
    We bought up a bunch of the Mac33's from Lucky's supplier. 200psi operation and decent little noid. Tiny. We are also working with MAC to get a custom Bullet that will be small (33mm long, 9mm in dia) and 200 psi.

    Are we test it and the like we can make it available to every one. They both have excellent flow, the new bullet should be above the 33 in flow.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •