Shots fired!!
A couple small modifications and it shoots really well now. I was giggling like a little girl but I ran out of air before i could take another video.
The schottky by the noid connection header is to act as a flyback diode to dissipate the voltage surge generated when the coil is de-energized and the magnetic field collapses.
The barrier dioide by the battery connection is to save the system if the battery is hooked up incorrectly. The down side is the voltage drop (.5v) this brings into play. Luckly we have a little bit of room to play with. Polarity protection can also been done with a transistor with minimual drop Read here for more detail.