Still searching around Crossfire's website has been down for weeks so I can't contact them directly. Don't want to spend $20 after shipping for one oring buying the kit from critical.
Does anyone happen to know the sizes of the two orings in a crossfire stealth reg? The rebuild kit (2 orings and a piston seal) is $8 plus shipping and all I need is the big one that goes inside the bonnet. I can pick one up at the local hardware store for 25 cents I just need to know the size. It got shredded when the bonnet came loose and started to unscrew while under pressure.
My tourney setup: Polished Insight NG_Spire with ramp and Crown SF_14in Dye UL .684-Crossfire 68/4500 with LP spring kit
My just for fun setup: System-X autococker with CP reg, aftermarket clamping feedneck, WGP internals and flame drop (because I like it hot)_Dye rotor with Virtue Crown 2.5 and Virtue SoftCycle arm_Ninja 48/3000 aluminum tank with Guerrilla Myth reg
Still searching around Crossfire's website has been down for weeks so I can't contact them directly. Don't want to spend $20 after shipping for one oring buying the kit from critical.
My tourney setup: Polished Insight NG_Spire with ramp and Crown SF_14in Dye UL .684-Crossfire 68/4500 with LP spring kit
My just for fun setup: System-X autococker with CP reg, aftermarket clamping feedneck, WGP internals and flame drop (because I like it hot)_Dye rotor with Virtue Crown 2.5 and Virtue SoftCycle arm_Ninja 48/3000 aluminum tank with Guerrilla Myth reg
Have you tried calling? Google says: (269) 383-1111 is their number.
Damn I got out of school like four days ago my physics class had like a hundred of those.
My tourney setup: Polished Insight NG_Spire with ramp and Crown SF_14in Dye UL .684-Crossfire 68/4500 with LP spring kit
My just for fun setup: System-X autococker with CP reg, aftermarket clamping feedneck, WGP internals and flame drop (because I like it hot)_Dye rotor with Virtue Crown 2.5 and Virtue SoftCycle arm_Ninja 48/3000 aluminum tank with Guerrilla Myth reg
If you're just using them general purpose, a cheap pair (~$10) will work fine and are good to have around.
Ever so many citizens of this republic think they ought to believe that the Universe is a monarchy, and therefore they are always at odds with the republic. -Alan Watts
I work for the company building the Paragon
Calipers should almost be mandatory for the Inception Forums.
Josh Coray
J4 Paintball
Lead Design
www.j4paintball.com