1 Attachment(s)
Inception Designs pump kits - Open Source files and 3D printable files
So we released our Pump Kits, along with a load of other stuff at PBE :)
We planned the pump kits with common pump parts that then fit 2K+, Empire Resurrection/Sniper/ & Karnivorr, or Mini/ER/Retro Series guns just by picking the mounting block and pump arm needed for your specific gun. Full bolt length and Mid Block pump arms will be available.
I'm also open sourcing the file for the pump handle so people can make whatever they like. We intentionally made the pump handle non-critical with the bushings in the rear pump plate so you can have functional printed parts and even pretty sloppy fits (as long as you are oversize) and everything will still work beautifully. The pump handle is bolted to the pump plate via two #10-24 bolts. You would either need to tap the printed part, or design in nut slots and use normal nuts to bolt down to.
I am hopping some of the insiders can make something cool so we can show photo's or maybe even samples at release and at our PBE booth. :D
File should be attached below as an IGES. :D
Please post pictures and let everyone know if you are open to taking on design work for other people. Thanks!