I am not always the best at getting what is IN my head out either! I figure if you didn't understand me, it is generally my fault. :)
Printable View
I am not always the best at getting what is IN my head out either! I figure if you didn't understand me, it is generally my fault. :)
V2, piston is the brassish looking piece at the end.
I am going to do an inline one more like the centerflag now. Will be a bit more space, but most likely simpler all around.
http://inceptionforums.com/attachmen...5&d=1376311630
http://inceptionforums.com/attachmen...4&d=1376311628
Luke, had one guy interested in a 86* frame... :)
Attachment 534Attachment 535
I guess I won't be any help on this, I don't fully understand the concept so there's not much I can do.
Luke, What don't you understand? I might not be the best at explaining stuff, but try me!
Luke. Therewill be two moving parts inside the frame. A sear as usual. And a sled that will control the three way. Timing is all set by the sear/sled contact. The brass piston in the back will push the sled which will also move the sear. Electro pnuematic solenoid in frame controls the brass piston
So really the idea is similar to the 'electro-pneu-mag-mod' using a Universal T-Board, mpa3 with piston and S070C-SDG-32 VALVE. Starting to make sense...
Yep.Quote:
So really the idea is...
any update on this?