Inception HF Bolt compatibility list
This list is to help people match the bolt size to their gun. Because of the use of the Planet Eclipse rubber tip the bore size fit is more important than conventional bolts.
0.700 bore should be selected for the following guns
Empire Sniper (using 11/16ths valves)
Empire Resurrection (using 11/16ths valves)
Inception gun bodies for Empire Sniper/Resurrection (using 11/16ths valves)
Inception Retro Series gun bodies (using 11/16ths valves)
Some AKA based guns (double check your gun before ordering) (using 11/16ths valves)
0.690 bore should be selected for the following guns
WGP based Full body guns (using 9/16ths valves)
WGP based Mid block guns (using 9/16ths valves)
Inception bodies made from WGP blanks (using 9/16ths valves)
Using a bolt with a tip that is too lose in your gun can result in the tip being blown off and blowback.
Using a bolt with a tip that is too tight can result in excessive friction and make it hard to cycle the bolt in the gun.
We recommend lightly lubricating the bolt tip and bolt o-rings with KC Trouble Free oil. Just enough to make them wet.