I see you fixed the issue people had regarding the profile being too high.
Type: Posts; User: neftaly
I see you fixed the issue people had regarding the profile being too high.
Yes, but it will be using serial voltages and not TTL voltages. You need a level converter or some resistors to keep from damaging the chrony. It's cheaper, easier and safer just to use that ebay...
Arduinos signal at 5v while this will be 3.3v, make sure you drop that voltage.
Touch black to the ground pin and red to the positive pin at the same time, you'll see +3.3v (or -3.3v if you have them mixed up).
Easy way to do it is to leave the black on the first pin, then...
Cool, two of those pins will be for power (negative/ground and positive), I'm guessing pins 1 and 4.
Of the other two pins, one will be a data out line and the other will either be data in or a...
http://inceptionforums.com/attachment.php?attachmentid=602
That's an empty 4-pin connector sitting above the (hollow) grip itself? You can probably connect a USB to 3.3v TTL converter like...
Can you please take a few detailed photos of the board?
A hair over 200000km on my E36 sedan. I re-lined it two weeks ago with a few meters of grey suede.
Seems to all come apart at around this age (same problem on my sisters E36).
The brand new "Ice Cube" system, which vents gas directly from a siphon tank? I think Tippmann beat you to that by a few years :dodgyrun:
I forgot to mention this earlier, FN 303 mags are basically just scaled-up rotary airgun magazines (so there shouldn't be any patent issues etc).
...
Thermostats, SSR's, opti-isolator board, 240vac to 24vdc and 24vdc to 12vdc power supplies are here. Looks like they'll barely just fit into the housing box. Going to have to pick up a crimper to...
http://inlandempire.craigslist.org/spo/4095426332.html
As the saying goes, if you want a CNC, buy a CNC. If you want a project, make a CNC :)
Crystalfonts is a retailer/reseller. They appear to be manufactured by Wisechip in Taiwan.
Polymerase? Yaaay that's all I have to show for years of work as a Molecular Biosciences undergrad, I'm helping :dodgyrun:
It's $2 on Taobao for single units of the 14 and 15 pin versions (the same ones as on ebay) =/
Worked out the operation cycle, did a flowchart. Took off the heater jackets, am organizing some new ones. Almost have the nozzle heater off, there's a lot of baked-on plastic around it that I've...
Are you sure it's not a timing issue, something retarded getting stuck on high?
Ninja edit: ... yeah you got it then
I use an Atten 858D, it's cheap but it does the trick (I don't use it nearly as much as my iron generally). As the name suggests it's primarily for rework - there is still absolutely a place for a...
Do you have a hot air rework station? I have a lot more luck with them, so much so that I turfed out my modified toaster oven. You can replace individual components and do double-sided work more...
Awesome! Did you have the sensors worked out too?
Moved it inside, attached some feet and got it off the pallet with a crowbar and a couple of jacks.
TI just released another Launchpad, the Hurcules RM42, which I'll be using instead.
I think...
I know the rough size of the outside but I only want to focus on the feed system. Hopefully I can convince Alex to donate his Ravern as a 100 rounder ;)
It won't use separate parts like a...
Tried to print the internals for my baby hopper, only mildly successful. I don't think the printer is that much at fault. Still need to work on the Gcode and get calibration right. Also want to try...
Had some trouble printing today though it appears to be a fault with the supplied 2GB SD card (it's a blank "Kingston"). I only really have SDHC cards so I'll have to sort something out.
I took a...