Results 1 to 5 of 5

Thread: Start up - what am I missing or doing wrong?

  1. #1

    Start up - what am I missing or doing wrong?

    -Installed Morlock.exe
    -connected usb to pc and DNA
    -W7 installed some drivers automatically
    -Morlock.exe says "connected"
    -blue blinky light blinks
    -change some settings, and hit "apply"

    Nothing seems to happen. LED keeps blinking rapidly.

    I wire up a solenoid and trigger switch to see if I can get it to click, and nothing.


    I have went back and re-read most of Kurts blog and other threads but I must have missed something.

    HELP!

    BigEvilOnline.com - Home of the bad, bad automag people.

  2. #2
    CAD Monkey skibbo's Avatar
    Join Date
    Apr 2013
    Location
    Milwaukee County, WI
    Posts
    1,058
    Supports Inception Designs
    I'll try with the one that I just got today from Simon and I'll let you know. I'm sure Curt will chime in pretty quickly here as well.

    Quick check, is the 10 pin connector the right way? I had mine upside down at first.



    My test setup seems to work. I blow air into the hose, and connect the black wire from the solenoid to the red DNA wire (like a trigger would) and the solenoid activates.
    Quote Originally Posted by BigEvil View Post
    -Installed Morlock.exe
    -connected usb to pc and DNA
    -W7 installed some drivers automatically
    -Morlock.exe says "connected"
    -blue blinky light blinks
    -change some settings, and hit "apply"

    Nothing seems to happen. LED keeps blinking rapidly.

    I wire up a solenoid and trigger switch to see if I can get it to click, and nothing.


    I have went back and re-read most of Kurts blog and other threads but I must have missed something.

    HELP!

    Last edited by skibbo; 10-05-2013 at 05:14 PM.
    Team Akkadian Paintball Squad

    B.S. Mechanical Engineering UW-Platteville 2012

    Quote Originally Posted by neftaly
    Simon Stevens said that will be totally fine and nothing bad could ever happen. Ever.

  3. #3
    Insider Curt's Avatar
    Join Date
    Jun 2013
    Location
    Atlanta, GA
    Posts
    295
    Supports Inception Designs
    Supports Inception Designs
    The boards do not come with the morlock code on them, you need to flash them with the app.

    Select settings..flash from Internet

    Ten do a factory reset. Should be good to go

  4. #4
    Quote Originally Posted by Curt View Post
    The boards do not come with the morlock code on them, you need to flash them with the app.

    Select settings..flash from Internet

    Ten do a factory reset. Should be good to go
    Excellent. Let the fun begin.

    *Just did it, btw.


    Also - is there a way to fire the board from the Morlock control panel?

    Thanks again. More questions to come.
    BigEvilOnline.com - Home of the bad, bad automag people.

  5. #5
    Insider Curt's Avatar
    Join Date
    Jun 2013
    Location
    Atlanta, GA
    Posts
    295
    Supports Inception Designs
    Supports Inception Designs
    Fire the board remotely without pulling the trigger? I think that would be a colossally bad idea

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •