Did you have to send your XDS in for the recall? They have my xds9 right now, hopefully I get it back before the new year.
I'll try to get a pick of some of my daily carry setups along with some of my other guns.
Taurus PT-1911
Good solid shooter
Ruger SR-556FB
Piston AR, Heavy but reliable
Springfield XD-s 45
Daily CCW. Accurate, small, manageable recoil with 165gr Hydra-Shok's, makes big holes in things. Not much more you could ask for in a CCW.
At the folks house I have a Rem 700 in 243, a Savage over-under 22/20ga combo (super fun open sights gun for squirrel hunting), a 50 cal Hawken Muzzle loader, Remington 22lr Pump, and an old 12ga pump, been a while since I shot it, might be a Remington as my old man was rather fond of them. The folks and I aren't exactly on speaking terms so it might be a while til I see my guns over there again....
Did you have to send your XDS in for the recall? They have my xds9 right now, hopefully I get it back before the new year.
I'll try to get a pick of some of my daily carry setups along with some of my other guns.
any of you guys ever shoot liberty ammo?
my friend got ahold of a box of liberty 9mm hallow points meant specifically for military and law enforcement
probably the hallowest hallowpoints I have ever seen hahaha, its genuinely as if the bullet is simply a shell with a hole in the front of it, they are crazy hot, his m&p shield was louder than my R1 at the range last time
ABET accredited level II machinist - CNC Programmer - Mechanical Engineering Technologist
Rio Grande Inc.
Here's my current collection in no particular order:
Ruger K10/22T
Currently has a Simmons Aetec 2.8-10x44 scope
Remington 700 VSSF in .223
Upgrades:
Jewell Trigger
Barrel cut 9" (now 17" long) - this was built for spotlighting varmints (legal in Texas)
Mag Extender
Duracoated OD with black in the flutes
Bushnell Elite 4200 4-16x40
Remington 700 LTR in .308
Upgrades:
Jewell Trigger
Mag Extender
Glass bedded
Nightforce 20 MOA 1 piece scope base
Bushnell Elite 4200 6-24x40
Remington 700 Titanium in 7mm-08
Upgrades:
Stoned/polished stock Remington trigger
Leupold 2.5-8x36
Custom 300 WSM
Specs/Upgrades:
Shilen #5 taper fluted barrel
Borden Alpine action
HS Precision Sporter stock
Jewell Trigger
Duracoated OD green with black in the flutes
Bushnell Elite 3200 5-15x40
Custom 338/300 Ultra (338 Edge)
Specs/Upgrades:
Stiller Precision Python action
Hart "Remington Magnum" taper barrel
Vais muzzle brake
Jewell trigger
McMillan Tooley MBR stock
Nightforce NXS 12-42x56 with NP-R1 reticle
(Coming soon - 20 MOA scope base and .885 NF rings)
Marlin 1895 SBL in 45/70
Upgrades:
TruGlo Reflex red dot sight
Armsport 1874 Sharps replica in 45/70
Upgrades:
Vernier rear sight with globe front sight
Remington 16 gauge Side by Side shotgun (made around 1916)
Winchester 1897 12 gauge
Specs/Upgrades:
Made around 1958
Takedown model (breaks apart at the front of the receiver)
Fajen stocks
Has 18.3" front half as well
Remington 870 12 gauge
Specs/Upgrades:
Coyote brown duracoat
Speedfeed stocks with Tiger Stripe Ind. Desert Digital print
Has matching 18.5" barrel with breacher choke and 2 round mag extension
Custom benchrest rifle in 6 PPC
Specs/Upgrades:
Kreiger barrel with .262 neck
Kelbly Panda action (right bolt, left port - no ejector)
Jewell trigger
Lee Six stock
Sightron 36x42
Kel-Tec Sub 2000 in 9mm
Gamo Whisper air rifle in .177 (included for LOLs)
Taurus Night Court Judge .410/.45 with 3" magnum chamber
Sig GSR Stainless Rail (before they called them 1911)
Specs/Upgrades:
Crimson Trace Master Series grips
Streamlight TLR-1 light
VZ "Turbo" screws
.400 Cor-Bon barrel
.45 ACP barrel
Ceiner .22 LR conversion
Magwell built into mainspring housing
Sig 1911 "Scorpion" in .45 ACP
Upgrades:
Also has black Ceiner .22 LR conversion
Ruger Blackhawk "three screw" in .38/.357 made around 1959
I haven't had a chance to get it sent in yet, although with the amount of rounds put thru it I am skeptical that mine has any issues. That and they just the other day figured out a solution for it and are doing them on a first come, first serve basis. I'm most likely going to wait til it dies down some in the next few months and send it in. That combined with the stupid cold PA winter means heavier clothing so carrying my 1911 won't be as big of an issue.
I have seen liberty ammo before but never shot it. From what I was reading on it, it might be a little high on the over penetration and going to be near impossible to get in the future. Heck midway has it on closeout right now if you want to stock up on it.
Yeah I'm aware of their shipping situation. Definitely the last time I will every buy a SA gun. The way they handled this situation has been piss poor. They told everyone 30 days after they receive it but failed to mention that they did not know, or have a solution for the problem until after the first 30 days.
Kyle; what kind of rifle is that? Accuracy International something or other? Looks like an L96 almost, very nice though regardless!
I know AI makes stocks that you can drop remington 700 uppers into (looks like yours kyle), was actually thinking about doing that myself for a little while.
Last edited by ElPanda; 10-23-2013 at 10:17 PM.
ABET accredited level II machinist - CNC Programmer - Mechanical Engineering Technologist
Rio Grande Inc.
http://youtu.be/8WiLqPB4lU0
$40 dollars per round ?
Awesome !
(cant figure out how to post youtubes)
endeavor to persevere.......