Results 1 to 10 of 10

Thread: Warpless Prophecy Z2?

  1. #1
    Insider
    Join Date
    Feb 2013
    Location
    Mount Vernon, WA
    Posts
    52

    Warpless Prophecy Z2?

    I would like to make a "warpless" setup for me warp left emag, and the standard seems to be the Halo Too I think mostly because it is cheap. The Z2 seems like it would offer a lot more tuning options...

    Typical warpless setups seem to just add and elbow roughly where I've drawn one and send things through the top of the hopper. I've never owned a prophecy z2, so I'm not familiar with them. Is there anything hiding under the trap door / spring loaded floor that would prevent the re-routing of paintballs upward?

    Mouse cad elbow in red:


    Trap door cutout in blue, elbow area in red:

  2. #2

  3. #3
    Insider
    Join Date
    Feb 2013
    Location
    Mount Vernon, WA
    Posts
    52
    Thanks for the info, I'll pick one up and start hacking

    That defender looks pretty sweet. Pricey, but sweet.

  4. #4
    And if you need a z2 i can help you lol

  5. #5
    You might want to do this with a Prophecy. Not only are they cheaper used, but they have larger paint capacity.
    BigEvilOnline.com - Home of the bad, bad automag people.

  6. #6
    Insider
    Join Date
    Feb 2013
    Location
    Mount Vernon, WA
    Posts
    52
    I'm having trouble finding a clear list of the differences.

    Isn't the history something along the lines of:

    Prophecy
    LTD
    Z2?

    Are there differences in how the ball stack forces is tuned between them? Any differences in shell strengths?

    Honestly larger paint capacity is probably not what I'm after in this case.

  7. #7
    Stay away from the LTD. It wasn't what it was supposed to be

    There are differences and for what you are doing I suspect you don't want/need the clutch. You can disable it in the Prophecy if you go that route. The Z2 is a better drive system, but a used Prophecy is probably cheaper.

  8. #8
    Insider new ion?'s Avatar
    Join Date
    Feb 2013
    Location
    Victoria, BC
    Posts
    1,132
    Supports Inception Designs
    Quote Originally Posted by Simon View Post
    Stay away from the LTD. It wasn't what it was supposed to be
    Care to elaborate? As one of it's creators, I can imagine you can be critical like nobody else...

    Also, I looked at picking up a LTD upgrade for a while.

  9. #9
    Insider new ion?'s Avatar
    Join Date
    Feb 2013
    Location
    Victoria, BC
    Posts
    1,132
    Supports Inception Designs
    Quote Originally Posted by Simon View Post
    Stay away from the LTD. It wasn't what it was supposed to be
    Care to elaborate? As one of it's creators, I can imagine you can be critical like nobody else...

    Also, I looked at picking up a LTD upgrade for a while.

  10. #10
    Junior Member
    Join Date
    Jul 2013
    Location
    Chester nh
    Posts
    11
    I'm did this to my z2 it works great only issue is was having was double feeds on a standard warp mag body so had a extra detent installed and it has been good so far

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •