Results 1 to 1 of 1

Thread: Inception Gentle Touch RAM (GTR)

  1. #1

    Inception Gentle Touch RAM (GTR)



    Gentle Touch Ram Details:

    GTR | RAM "Gentle Touch Ram" - Probably the greatest Autococker ram ever made!
    It's simply brilliant!

    This is the high end fully re-buildable ram that will work on all new and old school Autococker.
    Check out the feature list!



    GTR RAM Features:
    • * Extra Large ram shaft with a 44% increase in cross-sectional area of the ram shaft (reducing the area
      that the closing gas pressure can work on) when compared to our previous ram for the gentlest forward
      stroke possible whilst still retaining a strong rear stroke for reliable cocking and performance. The larger
      shaft reduces the surface area that the gas pressure works on meaning the force forwards is less making
      the gun shoot smoother and making it more likely that the ram will stop and pinch any paintballs caught
      by the bolt rather than chopping them.

      * Reduced rear volume so the gas can be exhausted faster allowing the piston to move back sooner
      providing faster cycle times.

      * Reduced ram forward force at any given LPR pressure means the application of gas pressure to
      the front of the ram actually overcomes the pressure holding the ram closed faster so the ram starts
      moving back quicker also, which again helps provide faster cycling times.

      * Extra large ram shaft resists bending

      * Ram shaft flats and shoulder allows you to screw the pump arm up to the shoulder for the perfect fit.
      It makes the joint stronger, the ram shaft less likely to bend and the finished result once installed looks
      almost seamless. In conjunction with our pump arms and the cross-drilled "idiot hole" this makes it super
      easy to install without leaving idiot marks on the pump arm or the ram shaft. Fine-tuning the length can
      be achieved with readily available shims and by adjusting the back block position on the threaded shaft.

      * Rear ram body made from stronger aerospace aluminum to resist damage or flexing.

      * Front ram body includes "hidden" allen key hole for extremely easy disassembly using a 3/16 allen key.
      No more tools on the outside messing up the anodized finish. It allows for clean and sleek body design.

      * Standard 10-32 barbs included with flats on the ram body for a better seal.

      * Fully rebuildable using standard o-rings and Inception ram bumpers. O-ring and bumpers are available
      separately.

    THIS RAM IS NOT COMPATIBLE WITH THE TRILOGY AUTOCOCKERS

    Watch the Video


    Last edited by bryan stowe; 12-23-2019 at 11:12 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •