Results 1 to 3 of 3

Thread: Pump Return Spring Weight

  1. #1
    Junior Member
    Join Date
    Jan 2014
    Posts
    1

    Pump Return Spring Weight

    I've just installed the Drift pump kit on my '97 P-block. The pump arm length is perfect. However, the return spring could be 3/8" longer. If I point the barrel up, the back block drops down 3/8". I'm looking for the spring weight so I can source a spring that is 3/8" longer.

  2. #2
    The spring weight for your pump should be 125 pounds per inch. This is slightly more than the weight of the original spring (100 pounds per inch), but it is necessary to prevent the back block from dropping down when the barrel is pointed up.

  3. #3
    Junior Member
    Join Date
    Jan 2024
    Posts
    1

    Лента алюминиевая металлизированная

    Как выбрать ленту алюминиевую металлизированную для упаковки продуктов
    алюминиевые ленты https://lenta-aluminievai-ms.ru/.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •