Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Got Z2 to stop blending paint, but why?

  1. #11
    If the Z2 is jamming but not reversing, something isn't right.

    Have you run an autotune recently? Run a diagnostic and autotune by holding down both rubber button and turning it on. Then release the buttons.

    It will do a test cycle and set everything up correctly. When it gets to purple push a button and let it spin for a few seconds and then turn it off.

  2. #12
    Junior Member
    Join Date
    Jan 2013
    Posts
    14
    Yes I did the autotune before and after lowering the speed to 2. PS didn't seem concerned when I told them about the jams. They just said try the motor and harness, which I didn't receive.

  3. #13
    Junior Member
    Join Date
    Jan 2013
    Posts
    14
    Lurker, the checkvalve is in place, don't know if it can be cleaned. Which is front pillow on lurker bolt? I saw someone said they enlarged orifice of the poppet and got rid of blowback but I don't have a spare.

  4. #14
    Insider PBSteve's Avatar
    Join Date
    May 2012
    Location
    Los Angeles
    Posts
    3,084
    Quote Originally Posted by Lurker27 View Post
    I went too far.
    What? Never.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •