This was on here until the reset of the forum. With the release of the new empire autococker I thought it would be fitting. Simon I was the first to do this

Here it is

Parts needed are
  1. WGP Autococker Front Block - Karnivor http://www.paintballgateway.com/wgpaufrblkar.html
  2. WGP Autococker Pump Arm - 2K5 Black Magic - Stainless http://www.paintballgateway.com/wgp05blmaaup.html
  3. WGP Autococker Mid Block Cocking Sled (Aluminum) - 05 Black Magic/Karnivor Mid Block - Black http://www.paintballgateway.com/wgp05blmakam.html Will need to be filed or mill thinner by 1/32" (ore you can uses the stock PLASTIC Empior slead
  4. Shocktech Autococker Raw 45 Slider Frame http://www.ebay.com/itm/330586182551...84.m1423.l2649 Only if you do not want to dirll and tap a second frame hole
  5. LPR, Ram, 3way of choice. Also a front block bolt if you want or you can use the original Empire one, it is a LPC also.