I am ordering a T2 with an 86 frame as we speak, when I get it I can give you dimensions, just let me know which dimensions you need
Does anyone happen to have a file/dimensions for an 86° frame? I drew one up based on a picture, but there's no way any dimensions are right.
Thanks in advance.
Team Akkadian Paintball Squad
B.S. Mechanical Engineering UW-Platteville 2012
Originally Posted by neftaly
I am ordering a T2 with an 86 frame as we speak, when I get it I can give you dimensions, just let me know which dimensions you need
Panda any updates?
Team Akkadian Paintball Squad
B.S. Mechanical Engineering UW-Platteville 2012
Originally Posted by neftaly
My T2 just shipped today Ill message back when I get it
-lower tube diameter is 1 inch so that radius at the top of the frame is .5 in
-the width of the frame at the trigger guard is .5 in
-the width of the frame at the snatch grip is .688 in
-the width of the frame at the grips is .875 in
-the overall length along the top of the frame (front to back) is 5.99 in
-the distance from the top of the frame to the upper face of the trigger window is .358 in
-the distance from the upper to lower face of the trigger window is 1.25 in.
-the distance from the top of the frame to the bottom of the trigger guard is 1.687 in
-the thickness of the bottom and front portions of the trigger guard is .077 in.
-the distance from the top of the frame to the horizontal face of the snatch grip is .517 in.
-the width of the grip flats is .530 in
-the width of the slot for the sear is .162 in.
-the width of the slot between the sear and front frame screw (trigger slot) is .261 in
-the width of the slot between the sear and rear frame screw is .475 in
-the distance between the centerlines of the front and rear frame screws is 4.125 in.
if you need more or need clarification lmk, its late and all I have are calipers
ABET accredited level II machinist - CNC Programmer - Mechanical Engineering Technologist
Rio Grande Inc.
Thanks! I would've replied sooner but moving and needing a new internet provider prevented me from coming on sooner.
Team Akkadian Paintball Squad
B.S. Mechanical Engineering UW-Platteville 2012
Originally Posted by neftaly
Well, I haven't had time to model it yet, but estimating from the grip thicknesses I don't think it'll work with the stock etha solenoid. Ion is another story though.
Team Akkadian Paintball Squad
B.S. Mechanical Engineering UW-Platteville 2012
Originally Posted by neftaly
Spare yourself and find some MAC33's.
Ever so many citizens of this republic think they ought to believe that the Universe is a monarchy, and therefore they are always at odds with the republic. -Alan Watts
I work for the company building the Paragon