Awesome. Messed around with a teammate's sniper this past weekend at Legends and I noticed this problem. Glad you guys have been on top of it for a while now.
If only we can get a private label Simonized Sniper with this mod done.
You wants eliminate/reduce the chance of chopping a paintball because you thought you pumped it far enough back but didn't?
You wants to back out the IVG on your Empire Sniper for a lighter and smoother stroke?
You have come to the right place.
History about the mod:
This mod is a Inception Designs inspired and developed via discussion on the simonized.com forums(The discussion thread where mod originated). Simon Stevens(founder/owner of Inception Designs, formerly of KEE) created the first set for me shortly after PSP World Cup 2012. It made a huge difference in the way the gun felt. The original two 2 guns are owned by FunSI00 on MCB and Troyus of PBN.
INCEPTION DESIGN!!!!!!!!!!!!!!
The Problem:
With the stock Empire Sniper, your gun will cock before a paintball is loaded into the breech(see first picture below). This often leads to blank shots or pinched/chopped paintballs by the bolt.
The Solution
Once it is modded, the cocking point and beech opening point is exactly the same.
The Price
Option 1 (Full Gun): $35 + return shipping
Send me your entire Sniper.
We do the milling/modifications.
We reassemble your marker along with timing and tuning your sniper before shipping it back to you.
Please don't send me a gun covered in mud and old paint. There will be an additional $5 if you you ship me a marker caked in mud and old paint.
Option 2 (Stripped): $30 + return shipping
You disassemble your gun and send me the body, detents, hammer(with lug) and main pump guide rod.
Side notes
Shipping to Me: Please use USPS with tracking and insurance.
Shipping to You: We will use USPS with tracking and insurance.
Turnaround time: 1.5 week from when I received them to when you get it back.
Profit: Simon doesn't want any money for the work but we will support him in 1 way or another.
Pieces that Modify
Last edited by noclue119; 05-24-2013 at 02:50 PM.
Awesome. Messed around with a teammate's sniper this past weekend at Legends and I noticed this problem. Glad you guys have been on top of it for a while now.
If only we can get a private label Simonized Sniper with this mod done.
Team Akkadian Paintball Squad
B.S. Mechanical Engineering UW-Platteville 2012
Originally Posted by neftaly
Found a spring that works. Shoots 280 FPS at 140 PSI and IVG flush.
Last edited by noclue119; 06-06-2013 at 03:01 PM.
Nice. Good to see it's not burping
Ever so many citizens of this republic think they ought to believe that the Universe is a monarchy, and therefore they are always at odds with the republic. -Alan Watts
I work for the company building the Paragon
i always found stoning off the guide rods helps on any sniper setup .... of course unless you have the stone available to you, its pretty hard to justify doing it at 350 bucks for a pair. really cleans up the marks that form on the guide rods if you can find a set of stones at work or somethng
Last edited by cockerpunk; 06-07-2013 at 09:38 AM.
Ever so many citizens of this republic think they ought to believe that the Universe is a monarchy, and therefore they are always at odds with the republic. -Alan Watts
I work for the company building the Paragon
http://www.airbearings.com/flatstones
you rub them together to make them flat (they are ground flat with diamond, but all materials change size, thats why they come in sets of two), down to a couple of micro-inches, and then use them on "flat" ground or machined metal surfaces to make them truly flat. you can also use them to re-flaten your granite tables and such. you'd be amazed just how much metal changes size, even just sitting on the bench for a couple of days, on this scale, it changes.
stoning is a lifestyle in the precision industry. i used to have a personal set from when i interned at professional instruments, but we have sets all over the place where i work now, so there is never a shortage.
Last edited by cockerpunk; 06-07-2013 at 03:38 PM.