Results 1 to 8 of 8

Thread: Hidden Easter Egg in the Software of the Z2... adjust your settings...

  1. #1

    Hidden Easter Egg in the Software of the Z2... adjust your settings...

    We, the engineers at Empire Paintball hid an “Easter Egg” in the software of the Z2 that would allow us to adjust it’s settings, and now I am going to share it with you.

    OK, onto the secret sauce...

    1) Turn the loader on, have it running but with no paint in it.

    2) Push and hold left but then push and hold right button also.

    3) Hold for about 5 seconds until the green LED flashes

    4) Then release left button first then release right button. You must release the buttons in the correct order. It feels weird at first, but becomes easy after an attempt or two. We made it weird on purpose.

    Programming is the same as a prophecy except now left and right buttons functions are switched:
    Left (rev) button chooses setting whether you want speed, sound activation, motor sensing or RF
    Right(fwd) changes setting value - Press the button the number of times you want the setting

    Green is speed and can be set from 1-6

    Orange is sound sensitivity and can be set from 1-6

    Red is motor sensing and should pretty much be left at the stock setting of 2 (it can only be 1 for off and 2 for on)

    Blue is RF and shouldn’t need to be adjusted either. 1 is off 2 is on.

    The values aren't the same as the Prophecy. So there are the same number of settings, but speed 3 on the Z2 isn't the same as speed 3 on an original Prophecy.

    Have fun!

    Simon

  2. #2
    Now that this is in the open forum, could I post this over on TechPB?

  3. #3

  4. #4
    Cool! Thanks Simon!

  5. #5
    Insider
    Join Date
    Apr 2012
    Location
    NE ohio
    Posts
    32
    woah i always thought it was.... flip on switch and then shoot.

  6. #6
    Quote Originally Posted by jonotwist View Post
    woah i always thought it was.... flip on switch and then shoot.
    It still is. But now with added options.

  7. #7
    Now we have to see if we are working on loaders just because someone jacked up their settings.

  8. #8
    I doubt it will be much different to the original Prophecy. Just less rf based issues.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •